Optional Accessory - Makita DUB363 Manuel D'instruction

To remove the blower pipe and end nozzle, perform the
installation procedure in reverse.
NOTE: The length of the nozzle can be changed by
moving the nozzle as shown in the figure.
1
► 1. End nozzle 2. Blower pipe
Installing or removing flat nozzle or
extension nozzle

Optional accessory

Attach the flat nozzle or extension nozzle to the end
nozzle, and then turn it to lock it into place.
1
2
► 1. Flat nozzle 2. Extension nozzle 3. End nozzle
You can also attach the flat nozzle or extension nozzle
to the blower pipe.
2
1
2
► 1. Flat nozzle 2. Extension nozzle 3. Blower pipe
To remove the flat nozzle or extension nozzle, perform
the installation procedure in reverse.
Attaching shoulder strap
CAUTION:
the shoulder strap to the machine securely. If the
hooks are attached incompletely, they may come off
and cause an injury.
CAUTION:
dedicated to this machine. Using other shoulder
strap may cause an injury.
3
Attach the hooks of the shoulder strap to the machine
as shown in the figure.
► 1. Hook
6 ENGLISH
Be sure to attach the hooks of
Be sure to use the shoulder strap
1
3
1