Maintenance; Greasing; Repairs - Husqvarna CS 2512 Manuel D'utilisation

Maintenance

CAUTION! Inspection and/or maintenance
!
should be carried out with the hydraulic
hoses disconnected.
The user must only carry out the maintenance and service
work described in this manual. More extensive work must be
carried out by an authorized service workshop.
In addition to the daily maintenance such as cleaning and
lubrication, the machine must be serviced. After 50 hours of
cutting, the machine should be serviced at an accredited
Husqvarna workshop. The saw should then be serviced after
every 100 hours of operation. The service is important so that
as the user you have a machine that works as effectively as
possible for a long time.

Greasing

In order for the wire to run as friction free as possible, the
magazine axles must be filled with grease. Fill with grease
after every 5 -10 hours of operation. Use Canadian Petroleum
OG2 or similar grease.

Repairs

CAUTION! All types of repairs may only be
!
carried out by authorised repairmen. This is
so that the operators are not exposed to
great risks.
MAINTENANCE
– 13
English