Festo DFST 50-30 Notice D'utilisation page 18

DFST
5 Fitting
Fitting mechanical components
Make sure there is sufficient space for
S
pneumatic connections and a shock
absorber change.
To align the DFST
Please note
Material streams approaching at an angle
reduce the service life of the DFST.
Make sure that the following points are
S
observed:
the material stream impacts both
rollers of the toggle lever.
the transport direction of the material
stream is aligned exactly vertical to
the roller toggle lever 4
With piston rod with fitting can be rotated
by 90° in each of the 4 positions by
moving the guide rod 8.
Secure the guide rod with screw locking
agent when inserting into the new
position.
18
Fig. 7
Fig. 8
.
Fig. 9
8
Festo DFST 0710NH