Setting The Grinding Level - Siemens TI921 Série Mode D'emploi

Masquer les pouces Voir aussi pour TI921 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 35
The doubleShot function can be
Note:
selected for all coffee drinks except for:
drinks with a small volume of coffee,
e.g. Ristretto
coffee drinks with milk and a small
volume of coffee
a small volume of coffee, e.g. setting
200 ml "Caffe Latte" with a 90%
share of milk (10% share of coffee)
preparation with ground coffee
dispensing two cups
Adjusting the milk/coffee mixing ratio
A coffee drink with milk is selected.
Press the milk button.
1.
Use the rotary selector to set the
2.
share of milk in %.
Example: When a value of 30% is
configured, 30% milk and 70%
coffee will be dispensed.
Press the milk button or the rotary
3.
selector to confirm.
Selecting cup size
A drink is selected.
Press the ml button. The preset
1.
volume depends on the type of
beverage.
Use the rotary selector to adjust the
2.
desired volume in ml increments.
Press the ml button or the rotary
3.
selector to confirm.
Notes
The volume cannot be changed for
ristretto.
The volume dispensed can fluctuate
depending on the quality of the milk.
Preparing two cups at once
A coffee drink or a coffee drink with milk
is selected.
Press the # button.
1.
Place two pre-heated cups on the
2.
left and right below the outlet
system.
Operating the appliance en
To begin dispensing the drink, press
3.
the rotary selector.
The selected drink will be brewed and
will then be dispensed into the two
cups.
Notes
The drink is prepared in two steps
(two grinding operations). Please
wait until the process is fully
completed.
The aromaDoubleShot function is
not possible in the # selection.

Setting the grinding level

This appliance features an adjustable
grinder. This enables the grinding level
of the coffee to be individually changed.
:
Warning
Risk of injury!
Do not reach into the grinding unit.
Caution!
The appliance may be damaged! Only
adjust the grinding level when the
grinder is running!
When the grinder is in operation, use
the rotary selector )2 to set the
grinding level.
Finer grinding level: turn
anticlockwise. (Fig. a)
Coarser grinding level: turn
clockwise. (Fig. b)
Notes
The new setting will not become
apparent until the second cup of
coffee.
For dark roast coffee beans, choose
a finer grinding level; for lighter
beans, choose a coarser grinding
level.
19

Publicité

Table des Matières
loading

Table des Matières