Outlet Protection; Maintenance - Dovre 425 GA Installation Et Mode D'emploi

2.5 Outlet protection

The appliance is fitted with thermal outlet protection which cuts out the pilot light and thus
turns off the main burner in the event of leakage of combustion gases from the draught
diverter.
The protective device is a thermal switch which opens an electrical contact if a set
temperature is exceeded and thus interrupts power to the thermocouple. This causes the
control block to turn off the gas supply to the main burner and pilot light. The appliance
can only be relit when the protective device has cooled down. The thermostat cannot just
be switched off. Call your installer if the outlet protection is activated frequently.
Possible causes for the activation of the outlet protection include:
• A bad connection between the appliance and the outlet flue.
• The outlet flue is wholly or partly blocked by falling debris or similar.
• Flue draught is too weak.
• An open kitchen with an excessively powerful cooker hood.
On replacement, only use the original thermal switch, not alternatives.

3 Maintenance

At the beginning of each burning season we recommend thorough dust removal from the
appliance.
Damage to the paint can easily be repaired using a spray can of "Thermoblack". Initially
the paint on your stove will still give off an odour. This should disappear after a while.
Never operate the appliance with a cracked or broken window.
Every year, have the appliance checked and serviced by your installer.
What to do if there is a smell of gas:
• Open all the windows of the space fully.
• Close off the space where you smell the gas from the rest of the building.
• Close the tap on your gas meter.
• Extinguish and avoid all open fires and flames.
• Notify your natural gas supplier or your installer.
26 wijzigingen op grond van technische verbeteringen voorbehouden