Safety Prescriptions; Personal Protection Equipment (Ppe) - TERMOTECNICA PERICOLI EOS42-53 Traduction De La Notice Originale

3.1 SAFETY PRESCRIPTIONS

It's very important that the safety instructions are always followed
and obeyed. Failure to do so could cause injury to persons and/or
damage to the machine.
The fan must be installed and serviced regularly by qualified
and authorized personnel only, since they are able to carry out the
operations necessary for the purpose and since they are aware of
safety regulations in force in the country of installation.

3.2 PERSONAL PROTECTION EQUIPMENT (PPE)

To avoid exposure to risk the personnel that operates the
machine during the life cycle phases of the machine such as
installation, lifting and transport, maintenance, are required to use
the following personal protective equipment:
SAFETY
HELMETS
PROTECTIVE
GLOVES
ANTI-FALL
EQUIPMENT
3.3 SAFETY NETS
The fan is equipped with a propeller that, when in operation,
moves with a rotary movement. The driving force is supplied by the
electric motor by means of pulleys and drive belt.
To ensure a sufficient degree of protection against accidental contact
with moving machine parts, metal safety nets have been provided.
WARNING
Only for exhaust fans:
Given the presence of risks arising from moving parts and the air
processed, the user is obliged to protect the fan evacuation area
through the enclosure preventing access to unauthorized persons.
Signal the forbidden area with appropriate warning signs.
It is still possible to buy a separate net for protective use of
each fan (SK option).
If installing at a height above ground of more than 2.7 meters, it
is not necessary to provide any additional protection.
WARNING
Only for exhaust fans with cone:
For installations at a height of less than 2.7 m from the ground
it is necessary to protect the intake area to avoid direct contact
with the blade, the option NT net is mandatory. The company
recommends the installation of the NT protection net also for
heights higher than 2.7m.
WARNING
It is strictly forbidden to remove and/or tamper with safety nets!
Ensure that the fan is switched off from the supply mains before
removing the guard!
WARNING
Safety nets are a safety device. In the event of damage to
the nets, proceed with a rapid replacement only with original
spare parts because only these are able to guarantee the level
of security required by the guidelines and technical standards.
EN
to avoid direct contact with the fan blades.
hinged on the outer sides and, once closed, is blocked in place with
the specific securing devices that are described in the Installation
Manual of the machine.
PROTECTIVE
CLOTHING
PROTECTIVE
GOGGLES
AIR INLET SIDE (Exhaust and circulator fans)
the exhaust fans models, SK option. The front safety screen should
be installed if the fan is set at a height of less than 2.7 meters off
the ground and/or if unauthorised and unqualified persons have
access to the area.
metal screen also prevents contact with the guard fins and with its
opening/closing mechanisms.
AIR OUTLET SIDE (Exhaust and circulator fans)
19
WARNING
Before putting the fan into operation, it is required to verify the
presence and correct positioning of the safety nets provided.
A metal safety screen is installed on the fan intake side in order
The exhaust and circulator fans mount a double screen that is
A metal safety screen may be mounted on the air outlet side of
In addition to preventing direct contact with the propeller, the SK