Bluetooth® Menu; Registering And Connecting A Device - Blaupunkt Toronto 400 BT Mode D'emploi

Bluetooth®
with the car sound system again. If you register a
sixth one, the Bluetooth® device registered fi rst is
unregistered.
Bluetooth® menu
In the Bluetooth® menu, you fi nd all the functions
for registering, connecting and managing Blue-
tooth® devices.
Calling the Bluetooth® menu
u Press the MENU•OK button ?.
u button @ to select the "BLUE-
Press the
TOOTH" menu item.
u button > to open the Blue-
Press the
tooth® menu.
u
Press the button
until the desired menu item is selected.
Notes:
• The Bluetooth® menu is automatically ex-
ited approx. 30 seconds after the last but-
ton activation and you are returned to the
display of the current audio source.
• If a Bluetooth® process is running (e.g.
re-establishing the connection to the last
connected device), the functions of the
Bluetooth® menu are blocked. If you at-
tempt to open the Bluetooth® menu during
this time, "LINK BUSY" appears on the dis-
play. To return to the current audio source,
press the DIS/ESC button = . To cancel
the Bluetooth® process and open the Blue-
tooth® menu, press the
Exiting the Bluetooth® menu
u Briefl y press the DIS/ESC button = to exit
the Bluetooth® menu.
40
@ / 2 repeatedly
button A.

Registering and connecting a device

Registering and connecting a cell phone
u
In the Bluetooth® menu, select the "PAIR"
menu item.
u button > to open the sub-
Press the
menu.
The "PHONE" menu item is selected.
u button > to register a cell
Press the
phone.
The display shows "PAIRING" and the Blue-
tooth® symbol is fl ashing. The car sound sys-
tem can now be recognised by a Bluetooth®
cell phone for approx. 2 minutes and con-
nected.
u
Search the car sound system from your
cell phone (Bluetooth® name: "TORONTO
400 BT").
As soon as the car sound system is found
by the cell phone and should be connected,
"ENTER PIN" appears on the display and the
PIN "1234".
u
Establish the connection from your cell
phone. Enter the PIN displayed by the car
sound system.
The display may show "PAIRED", followed
by "CONNECTED", as soon as the car sound
system and the cell phone are registered and
connected.
Note:
If no connection can be established, "CON
FAIL" (connection failed) is briefl y displayed.
Registering and connecting a Bluetooth®
streaming device
u
In the Bluetooth® menu, select the "PAIR"
menu item.
u button > to open the sub-
Press the
menu.
The "PHONE" menu item is selected.