Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Introduction
MANUFACTURER:
REDSTONE
BP 36666, 59712 LILLE Cedex 9
France
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and
success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due
to the non-compliance of the electric regulations and
VDE regulations 0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the operating instruc-
tions before installing and commissioning the device.
The operating instructions are intended to help the user
to become familiar with the machine and take advan-
tage of its application possibilities in accordance with the
recommendations. The operating instructions contain
important information on how to operate the machine
safely, professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only be
operated by persons who were instructed concerning the
operation of the machine and who are informed about
the associated dangers. The minimum age requirement
must be complied with. In addition to the safety require-
ments in these operating instructions and your country's
applicable regulations, you should observe the generally
recognized technical rules concerning the operation of
woodworking machines.
REDSTONE | BP 36666, 59712 LILLE Cedex 9 | France
2. Machine description (Fig. 1/2/3/4)
1.
Saw table
2a / 2b
Guide rail stop
3.
Saw blade guard
4.
Attachment saw blade guard
5a.
Suction hose
5b.
Adapter Suction hose
6.
Riving knife
7.
Saw blade
8.
Table insert
9.
Rip fence
10.
Guide rail table width extension
11.
Table width extension
12.
Locking rip fence
13.
Sight glass
14.
Push stick
15.
Lock table width extension
16.
Locking lever angle adjustment
17.
Hand wheel height adjustment
18.
ON / OFF switch
19.
Wheels
20.
Scale cross stop
21.
Locking handle cross stop
22.
Cross stop
23.
Locking lever riving knife
24.
Stop rail
25.
Scale rip fence
26.
Scale table extension
3. Scope of delivery
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the pack-
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
• Operating manual
• Saw with pre-installed saw blade
• Saw blade guard
• Suction hose
• Adapter Suction hose
• Riving knife
• Rip fence
• Fence rail
• Cross stop
• Table width extension (1x)
• Push stick
• Assembly material
4. Intended use
The bench-type circular saw is designed for the slitting
and cross-cutting of all types of timber, commensurate
with the machine's size.
The machine is not to be used for cutting any type of
roundwood.
17 І 36
Publicité
Table des Matières
