Adjusting Control Settings; Icemaker Operation - LG LSXS22423 Série Manuel D'utilisateur

ADJUSTING CONTROL SETTINGS

Give the refrigerator time to cool down completely
before making final adjustments. It is best to wait 24
hours before doing this. The initial settings mentioned in
CONTROL PANEL FEATURES section should be correct
for normal household refrigerator use.
The refrigerator control functions as the thermostat for
the entire appliance (refrigerator and freezer sections).
The colder the setting, compressor will the longer the
run to keep the temperature colder. The freezer control
refrigerator. Setting the freezer control to a lower
temperature keeps more cold air in the freezer
compartment to make it colder.
If you need to adjust temperatures in the refrigerator or
freezer, start by adjusting the refrigerator and allow 24
hours for the temperature to stabilize. If it is too warm or
too cold, then adjust the freezer control. Use the settings
listed in the chart below as a guide. Always remember to
wait at least 24 hours between adjustments.
CONDITION/REASON:
REFRIGERATOR section too
warm
–Door opened often
–Large amount of food added
–Room temperature very
warm
FREEZER section too warm/
ice not made fast enough
–Door opened often
–Large amount of food added
–Very cold [room 55°F (13°C)]
room temperature
(Compressor does not cycle
often enough).
–Heavy ice usage
–Air vents blocked by items
REFRIGERATOR section too
cold
–Controls not set correctly for
your conditions
FREEZER section too cold
–Controls not set correctly for
your conditions
USING YOUR REFRIGERATOR
RECOMMENDED
ADJUSTMENT:
Set the Refrigerator
control one degree
colder; wait 24 hours
for the new setting to
take full effect before
making another
adjustment.
Set the Freezer
control one
degree colder; wait
24 hours for the new
setting to take full
effect before making
another adjustment.
Move items out of
airstream
Set the Refrigerator
control one degree
warmer; wait 24
hours for the new
setting to take full
effect before
making another
adjustment.
Set the Freezer
control one degree
warmer; wait 24
hours for the new
setting to take full
effect before
making another
adjustment.
17
ICE MAKER OPERATION
WARNING
PERSONAL INJURY HAZARD
Avoid contact with the moving parts of the
ejector mechanism, or with the heating element that
releases the cubes. DO NOT place fingers or hands
on the automatic ice making mechanism while the
refrigerator is plugged in.
A newly-installed refrigerator may take 12 to 24 hours
to begin making ice.
Indicator Light
Ice Cube Size
selector button
The ice maker will produce 5 cubes per cycle,
approximately 90 cubes in a 24 hour period,
depending on freezer compartment temperature,
room temperature, number of door openings and
other operating conditions.
If the refrigerator is used before the water connection is
made to the ice maker, set the power switch to OFF (O).
Throw away the first few batches of ice to allow the water
line to clear.
Be sure nothing interferes with the sweep of the shutoff
arm. When the bin fills to the level of the shutoff arm,
the icemaker will stop producing ice. It is normal for
several cubes to be stuck together.
If ice is not used frequently, old ice cubes will become
cloudy, taste stale, and shrink.
Shutoff Arm
Power Switch
(ON/OFF)