Connecting the System
Connecting the system
Connecting to the display with 26-pin RGB input (AVH-P6400CD, AVH-P6400, etc.)
7
Power cord
(Ex. AVH-P6400CD, AVH-P6400)
Microphone
☞
See page 27.
GPS antenna
☞
See page 22.
Use this jack when connecting the CUE unit for
obtaining traffic information.
☞
See pages 11-13.
26-pin RGB cable
(supplied)
6m (19ft 8in.)
When resetting AV Head Unit
When pressing the reset button of AV Head
Unit while Navigation System and AV Head
Unit (AVH-P6400CD, AVH-P6400) are com-
bined, make sure that ACC is tuned OFF. If
the reset button is pressed while ACC is ON,
it may not work properly.