Charging The Mobile Phone - SilverCrest SKHU 2 B2 Mode D'emploi

Charging the mobile phone

Connect the car USB adapter 9 to your vehicle's
♦
on-board power supply (cigarette lighter). The
operating LED w lights up white to indicate that
the car USB adapter 9 is ready for use. It is
possible that the ignition has to be switched on
first depending on the vehicle type.
Connect the charging cable r to the USB type
♦
A socket e on the car USB adapter 9 and the
mobile phone. To use the USB type C plug z,
connect this to the micro USB plug t. Charging
starts immediately and is indicated on the mobile
phone display.
NOTE
To use the USB type C socket q you will need
♦
an appropriate cable, which is not supplied.
Contact your local electronics dealer.
After charging, remove the car USB adapter 9
♦
from the cigarette lighter by pulling on the pull
ring 0.
│ GB │ IE │ NI
■ 14 SKHU 2 B2