Remote Control - Panasonic CS-PA7KKD Guide Rapide

REMOTE CONTROL

Maximum distances: 8m
Press the remote control's button
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2 TO SET TEMPERATURE
• For heat, cool and dry modes, the range of temperature
for selection is 16˚C~30˚C.
• Operating the unit within the recommended temperature
could induce energy saving.
COOL mode : 26˚C ~ 28˚C.
HEAT mode: 20˚C ~ 24˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
3 TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects the operation mode according to the room
temperature.
• Once auto mode is selected, the unit will operate at the
standard setting temperature.
• To change the standard setting temperature, press
" " or for "
Room Operation
temperature mode
23°C & above Cool
Below 23°C Dry
Below 20°C Heat
HEAT MODE - TO ENJOY WARM AIR
• In heat mode, it may take a while for the unit to warm up.
The POWER indicator blinks during preheating.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
4
F567313_EN_CS4.indd 4
INDICATOR
(Green)
(Orange)
for
".
Standard setting
temperature
(+2°C) (–2°C)
25°C 27°C 23°C
22°C 24°C 20°C
21°C 23°C 19°C
4 TO SELECT FAN SPEED (3 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
TO ADJUST VERTICAL AIRFLOW DIRECTION
5
(5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing up/
down automatically.
• In HEAT mode, if AUTO is set, the louver fix at
predetermined position.
Remote Control display
3
4
2
1
5
2009-12-28 15:17:17