CLEARANCES REQUIRED
FOR CLOSET INSTALLATION
1.77 in /
45.0 mm
1.57 in /
40.0 mm
Fig. 4
0 in / 0 mm between the Back of the Unit and the wall
Note: It is recommended that service clearances are considered when locating a suitable area for the unit.
WARNING
• The boiler must not be installed on carpeting.
• Keep boiler area clear and free from flammable vapors and liquid.
1.
Check for nearby connections to:
•
System water piping
•
Venting connections
•
Gas supply piping
•
Electrical power
2.
Check the area around the boiler. Remove any combustible materials, gasoline and other flammable liquids.
3.
Ensure the Boiler's gas control system components are protected from dripping or spraying water.
WARNING
Failure to keep boiler area clear and free of combustible materials, gasoline and other flammable liquids and
vapors can result in severe personal injury, death or substantial property damage.
INSTALLATION AND SERVICING INSTRUCTIONS
1.77 in / 45.0 mm
1.77 in /
45.0 mm
3.1 SELECTING THE BOILER LOCATION
12
CLEARANCES
FOR COMBUSTIBLES
23.62 in /
600.0 mm
1.77 in / 45.0 mm
7110242.02 - en