Sony RM-BR300 Mode D'emploi page 7

counterclockwise (toward NEAR) to focus on a
near subject, and clockwise (toward FAR) to focus
on a far subject.
F AUTO/MANUAL button and AUTO indicator
Press this button to select focus mode AUTO or
MANUAL.
When AUTO is selected, the AUTO indicator lights
and the camera focuses automatically on the subject
in the center of the screen. The FOCUS control and
the ONE PUSH AF button are disabled.
When MANUAL is selected, the FOCUS control
and the ONE PUSH AF button are enabled (with
the FOCUS indicator lit).
For the BRC-Z700 or BRC-Z330, you can adjust
the focus manually if AF ASSIST is set to ON in
the FOCUS menu. For details, refer to the
Operating Instructions of the BRC-Z700 or BRC-
Z330.
G ONE PUSH AF button
This button is enabled when MANUAL is selected
with the AUTO/MANUAL button. Press the button
to perform the one-push auto focus function (except
the EVI-D30/D30P).
H RESET button
Hold down this button and press one of the
POSITION buttons, and the memory of the camera
corresponding to the pressed POSITION button is
cleared to the factory-preset conditions.
When multiple cameras are connected, the camera
addresses are set by holding down this button and
pressing the POWER button.
I PRESET button
Hold down this button and press one of the
POSITION buttons, and the current camera settings
are stored in the memory of the camera
corresponding to the pressed POSITION button.
J PANEL LIGHT button
Press this button to illuminate all the POSITION
buttons and CAMERA buttons. Press the button
again to turn off the illumination.
K BACK LIGHT button
When the FULL AUTO exposure mode is selected
on the camera, press this button to enable the
backlight compensation function of the camera.
Press it again to disable the function.
For the BRC-H900, BRC-Z900, BRC-Z700 and
BRC-Z330 camera: in the exposure mode, hold
down the SHIFT button and press this button to
enable the spotlight compensation function. This
function adjusts the exposure to a darker level if a
portion of the subject is brightly lit.
To disable spotlight compensation, hold down the
SHIFT button and press this button again.
Note
The backlight compensation and spotlight
compensation exposure mode of the BRC-H900
differ from the FULL AUTO exposure mode.
Spotlight compensation and backlight
compensation adjustment cannot be performed at
the same time.
L PAN-TILT RESET button
Press this button to reset the pan/tilt position of the
camera to the initial conditions.
M ONE PUSH AWB button
When the ONE PUSH white balance mode is
selected on the camera, press this button to perform
the one-push white balance adjustment.
N MENU button
For the BRC series Color Video Camera, press this
button for about one second to display the menu of
the camera, return to the main menu or turn off the
menu.
For other cameras, press this button for about one
second to turn the on-screen data display on or off.
O Joystick
The joystick is used for pan/tilt and zoom
operations. Select the camera you want to control
using the CAMERA buttons and operate the
joystick.
Panning and tilting
When you incline the joystick right and left, the
camera pans. When you incline it forward or
backward, the camera tilts.
The pan/tilt speed changes according to the angle of
the inclination.
When you release the joystick, the camera
movement stops.
Zooming
When you turn the dial on the upper part of the
joystick clockwise, the subject becomes larger
(zoom in). When you turn it counterclockwise, the
subject becomes smaller (zoom out).
To face the camera back to the front
When you press the button on the top of the joystick
for one or two seconds with or without the menu
displayed, the pan/tilt/zoom are reset and the
camera returns to the front.
Location and Function of Parts
7
GB