Reconstructing Data Volume (Changing Raid Types) (Only The Nsr-100/50) - Sony IPELA NSR Série Manuel D'installation

8
When you have verified the settings for each
camera, click [Monitoring].
The "Monitoring" window appears.
By clicking [Configure], you can switch to the
"Configuration" screen and make changes to the
settings.
* For details on how to use the "Monitoring" screen
and "Configuration" screen, refer to the User's
Guide (PDF) included on the supplied NSR
Series Manual, Tool & Source Codes CD.
Reconstructing Data
Volume (Changing RAID
Types) (Only the NSR-
100/50)
RAID constructions that can be set as data volumes
differ depending on the model number within the NSR-
100/50.
* RAID is not available for the NSR-25.
Model Type
NSR-100 RAID-5
RAID-1+0 450 GB
RAID-0
NSR-50 Spanning
RAID-1
Caution
• Be aware that all recorded images are deleted when
reconstructing data volume.
• When changing the settings is necessary, make sure to
change the RAID construction beforehand.
1
Connect the USB keyboard and USB mouse to the
NSR, and turn on the power.
The following screen and a progress bar for
hardware startup appear.
2
Press F12 on the keyboard while the progress bar is
displayed.
The screen similar to the following appears.
Example: For the NSR-50 (there are 3 menu items
for the NSR-100)
* The number of devices and their names may
differ from the following example screen.

Reconstructing Data Volume (Changing RAID Types) (Only the NSR-100/50)

Approximate Redund- Default
capacity ancy setting
670 GB Yes
Yes
900 GB None
430 GB Partial
210 GB Yes
Yes
Yes
21