System Requirements - Sony IPELA NSR Série Manuel D'installation

High reliability
The NSR-100/50 performs high reliability through:
• NSR-100: RAID 0, 1+0, and 5
• NSR-50: spanning* and RAID 1
When used with a RAID 1, 1+0 or 5, the system can
continue functioning even if one of the hard disks
develops a malfunction. Similarly, because the system
software and settings are stored on the internal flash
memory of the NSR, if the system software develops a
malfunction, lightning-quick restoration of the system is
possible. The NSR also supports uninterruptible power
supplies (UPS)**, making them extremely reliable
systems.
* Spanning: Function allowing several hard disks to be
virtually seen as one.
** Sony recommendation only.
Notes
• When you use RAID 0 with the NSR-100 or spanning
with the NSR-50, there is no data redundancy. Also,
storage capacity varies according with the RAID level.
• RAID is not available for the NSR-25.
Other features
• You can display the images from up to 64 cameras (8
× 8 images) on one screen.
• The NSR is capable of manual, scheduled, and alarm
recording, among others.
• The NSR is equipped with a motion detection
1)
function .
• Run searches for recorded images by camera name,
date, alarm, and other methods.
• Create privacy zones by using the dynamic masking
2)
functions . Dynamic masking covers pan, tilt, and
zoom.
• Audio recording and playback
from compatible cameras.
1) Some functions are limited depending on the number of
cameras connected.
2) Some functions are limited depending on which camera
models are connected.
3) The optional active speakers are required.
Important
This manual only describes how to install and configure
the NSR. For detailed explanations about how to use the
recorder, refer to the "User's Guide" (PDF) on the
supplied "NSR Series Manual, Tool & Source Codes
CD".
3)
are also supported

System Requirements

The hardware required in order to use this recorder are
as follows.
• Sony Network cameras
Contact your dealer for details about compatible Sony
network cameras.
1)
• Monitor
2)
• USB Keyboard
3)
• USB Mouse
• Network switch
• 1000Base-T/100Base-TX/10Base-T cable
• CF (CompactFlash) card or USB memory device
1) For details about monitors supported by the NSR, contact
your retailer.
The following "Generic" type monitors can be selected.
Frequency is indicated at the end of each line.
- Generic LCD Display; LCD Panel 1024x768; 40-70
- Generic LCD Display; LCD Panel 1280x1024; 50-75
- Generic LCD Display; LCD Panel 1600x1200; 60
- Generic CRT Display; Monitor 1024x768; 50-70
- Generic CRT Display; Monitor 1280x1024; 50-90
- Generic CRT Display; Monitor 1600x1200; 50-90
The following resolutions can be specified.
- XGA (1024×768)
- SXGA (1280×1024)
- UXGA (1600×1200)
2) Use a USB keyboard with a cable. However, keys other
than the standard may not function. Wireless or infrared
USB keyboards may also not function properly.
3) Use a USB mouse with a cable. However, three-button or
wheel mice may not function properly. Wireless or infrared
USB mice may also not function properly.
4) Required when backing up system information such as
logs.
- For CF, use a card that has been formatted in advance
with VFAT.
- For USB memory, use a device that supports general
USB Mass Storage Class specifications.
- CF cards are not compatible with the NSR-25.
4)
5
System Requirements