Ayce 3276 Traduction De La Notice Originale page 96

f. Dust extraction box (Fig. 6)
Fig. 6
g. LED work-light (Fig. 7)
Fig. 7
h. Changing the blade (Fig. 8)
!
Always wear sturdy gloves when handling or changing blades as they
can be very sharp.
WARNING
Fig. 8
• To attach the dust collection box,
simply insert the dust extraction box
into the extraction port and slide fully
in to keep it in position.
• For efficient operation, open and empty
the dust collection box when it is no
more than half full.
The tool has LED light to illuminate the
work area and improve vision when
working in areas with insufficient light.
The LED light will switch on automatically
while the tool is connected with power
supply.
• Only use sharp and undamaged saw
blades. Cracked or distorted saw
blades must be replaced immediately.
• Place the saw on its side on a flat
surface.
• Rotate the saw blade by hand
whilst depressing the spindle lock
button until the blade locks. Whilst
depressing the spindle lock button,
turn the blade bolt anti-clockwise
using the wrench provided.
• Remove the outer blade flange and
the blade bolt. Raise the lower blade