Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Power management:
The hole cooking hob is equipped by a maximum of power. When the booster function is activated,
and not to exceed the maximum power, the electronic system orders to reduce automatically the
power level of an other heating zone. The display is blinking on [9] during a few seconds and then
shows the maximum of power allowed ([6] or [8]).
Heating zone selected
[P] is displayed

Timer

The timer is able to be used simultaneous with all 4 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
Setting and modification of the cooking time :
Action
To select a heating zone
To select the power level
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the time reaches [00].
To stop the cooking time:
Action
To select a heating zone
To select « Timer »
To stop the « Timer »
If several timers are activated repeat the process.
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [00] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ ].
Egg timer function :
Action
Activate the hob
Select« Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
As soon as the selected cooking time is finished the timer displays blinking [00] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ ].
The other heating zone: (example: power level )
[9] goes to [6] or [8] depending the type of zone
Control panel
Press on key [+]
Press on key [+] or [-]
Press on key [ ]
Press on key [-]
Press on key [ ]
Control panel
Press on key [+]
Press on key [ ]
Press on key [-] and [ ] Displays [00] then stops
Simultaneously
Control panel
Press on key [0/I]
Press on key [ ]
Press on key [-]
Press on key [ ]
Display
The zone control light is on
[1] .... [9] [P]
The time displays [00]
[60] wents to 59,58,57,......
The time increases...
Display
The zone control light is on
The remaining time
Display
The zone control lights are on
Time [00] minutes
[60] wents to 59,58,57,......
The time increases...
NL
FR
ES
EN
1

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bikw-75

Table des Matières