Pan Detection; Residual Heat Indication - BORETTI BIK-70 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Start-up/ switch off a heating zone :
Action
Increase power
Decrease power
Stop
If no action is taken within 20 seconds the hob will go back into stand by mode.

Pan detection

The pan detection ensures a perfect safety.
The induction doesn't work :
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this case
it is impossible to increase the power and the display shows [U]. This symbol disappears when
a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows [U].
The symbol [U] disappears when the pan is put back to the heating zone. The cooking continues
with the power level setted before.

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [H] on the display.
The symbol [H] disapears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.
Booster function
The booster function [P] grants a boost of power to the selected heating zone. If this function
is activated the heating zones works during 10 minutes with an ultra high power. The booster is
foreseen for example to heat up rapidely big quantities of water, like nuddles cooking.
• Start up / Stop the booster function:
Action
Zone selection
Increase power
Start up the booster
Stop the booster
The booster function [P] can also be started directely:
Action
Zone selection
Start up the booster
Stop the booster
0
Control panel
touch key [+]
touch key [-]
touch simultaneous [+] and [-]
Control panel
press key [+]
touch key [+]
press key [P]
press key [-]
press key [P]
Control panel
press key [+]
press key [P]
press key [-]
press key [P]
Display
[1] to [9]
[9] to [1]
[0] or [H]
Display
[0]
[1] to [9]
[P] during 10 mn
[9]
[9]
Display
[0]
[P] during 10 mn
[9]
[9]

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bikw-75

Table des Matières