Playing Jpeg Files; Playing Back Slide Show - Pioneer BDP-330 Mode D'emploi

Playback

Playing JPEG files

DVD-RW DVD-R CD-R
NOTE
• Do not disconnect the USB memory device while it is
playing.
• For details on the image files that can be played, see
"About playing image files" (page 11).
• During "Normal play", still images are played one by one
while during "Slide show", they are automatically replaced
one after another.
• When USB memory devices are connected to both the
USB ports on the player's front and rear panels, only the
image files recorded on the device that was connected last
are played.
1
Load the disc or USB memory device on which
the image files are recorded, then press HOME
MENU to display the HOME MENU.
2
Press  to select "Photo", then press
ENTER.
3
Press  to select "DVD/CD" or "USB", then
press ENTER.
4
Select the file or folder.
Use  to select the file.
•
Use  to select the folder, then press ENTER. The
•
files in the folder are displayed.
CD-RW USB
5
Use  to select the folder whose still
images are to be played, then press ENTER.
8/15
6
Press or to replace one
image with another.
• The same operation can be performed by pressing
 or  REV/ FWD.
• Press RETURN if you wish to return to the folder
selection screen.
7
To stop the still image playback at any time,
press  STOP.

Playing back Slide Show

1
Load the disc or USB memory device on which
the image files are recorded, then press HOME
MENU to display the HOME MENU.
2
Press  to select "Photo", then press
ENTER.
3
Press  to select "DVD/CD" or "USB", then
press ENTER.
4
Press  to select the folder, then press
 PLAY to play.
• A slide show of the images in the selected folder is
played.
• Press  PAUSE to pause the slide show. Press
 PLAY to resume playback from where it stopped.
5
Press  STOP to stop the play at any time.
• Press RETURN to play a slide show of still images
in another folder.
35