Adjusting The Valve Clearance - SELVA MARINE Ray 8 Manuel D'entretien

THERMOSTAT, TIMING BELT AND GEARS
INSTALLING THE TIMING BELT
Install:
Timing belt 5


Installing steps:
(1)Turn the drive gear 1 and align the
washer groove on the drive gear and
"∆" mark on the cylinder body 2
a
(portin ).
(2)Turn the driven gear 3 and align the
"∆1" mark on the driven gear and "∆"
mark on the thermostat cover 4
b
(portin ).
(3)Install the timing belt 5.
NOTE:
Install the timing belt with the part name
facing up.
(4)Turn the crankshaft clockwise 2 turns
and make sure the drive gear and
driven gear are correctly aligned with
the timing marks.

ADJUSTING THE VALVE CLEARANCE

Adjust:
Valve clearance


Refer to the "ADJUSTING THE
VALVE CLEARANCE" on page 3-15.
5-34