Maintenance And Cleaning - IKA Color squid Mode D'emploi

All elements of the display will flash briefly.
All important safety functions will be tested.
Subsequently, the software version is indicated.
The appliance is operable after this check.
• The device is maintenance-free. It is only subject to
the natural wear and tear of components and their
statistical failure rate.
/// Cleaning
• For cleaning disconnect the mains plug!
• Use only cleaning agents which have been
approved by IKA to clean IKA devices.
These are water (with tenside) and isopropanol.
• Wear protective gloves during cleaning the devices.
• Electrical devices may not be placed in the
cleansing agent for the purpose of cleaning.
• Do not allow moisture to get into the device when
cleaning.
• Before using another than the recommended
method for cleaning or decontamination, the user
must ascertain with IKA that this method does not
destroy the device.
14

Maintenance and cleaning

• Set the speed using the knob.
The displayed value will flash until the desired motor
speed is reached.
/// Spare parts order
• When ordering spare parts, please give:
- device type.
- serial number, see type plate.
- position number and description of spare part,
see www.ika.com.
- software version.
/// Repair
• Please only send devices in for repair that have
been cleaned and are free of materials which
might present health hazards.
• For repair, please request the "Safety Declaration
(Decontamination Certificate)" from IKA or use
the download printout of it from IKA website at
www.ika.com.
• If your appliance requires repair, return it in its
original packaging. Storage packaging is not
sufficient when sending the device - also use
appropriate transport packaging.