Hach US9001 Manuel D'utilisation page 3

Table of contents
Specifications on page 3
General information on page 3
Installation on page 6
Specifications
Specifications are subject to change without notice.
Specification
Dimensions (∅ x L)
Enclosure
Weight
Frequency
Accuracy
Measurement range
Power requirements
Operating temperature
Operating humidity
Storage temperature
Resolution
Cable jacket material
Cable diameter
Cable length
Beam angle
Enclosure rating
Compatible instruments FL series flow loggers and AS950 samplers
Certifications
Warranty
General information
In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual. The manufacturer reserves the right to
1
Refer to Replacement parts and accessories
conduit extension kit.
Details
US9001: ∅ 3.02 x 10.31 cm (∅ 1.19 x 4.06 in.)
US9003: ∅ 4.06 x 28.04 cm (∅ 1.6 x 11.04 in.)
US9001: 316 stainless steel
US9003: 316 stainless steel and ABS
US9001: 0.76 kg (1.68 lb) with 9.14 m (30 ft) cable
US9003: 0.92 kg (2.03 lb) with 9.14 m (30 ft) cable
120 kHz
0.008 in./in. from the calibration point at steady state temperature, still air and ideal
target
US9001: 13.34 to 396.24 cm (5.25 to 156 in.)
US9003: 0 to 382.91 cm (0.00 to 150.75 in.)
12 VDC, 0.0416 A, 0.5 W
–18 to 60 °C (0 to 140 °F)
0 to 95%, non-condensing
–40 to 60 °C (–40 to 140 °F)
2.54 mm (0.01 in.)
Polyurethane
6.10 mm (0.24 in.)
9.14 m (30 ft)
Note: 91.44 m (300 ft) maximum
6 ° (half angle, typical)
NEMA 6P, IP 68
CE
1 year
Maintenance on page 15
Troubleshooting on page 15
Replacement parts and accessories
1
on page 16 for the extension cables and the
on page 16
English 3