Safety Instructions Related To The Product And Technology; Delivery Contents - Aventics ED05 Rail Notice D'instruction

Régulateur de pression
Masquer les pouces Voir aussi pour ED05 Rail:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AVENTICS | ED05 | R414010201–BAL–001–AA | English
W
Comply with the technical data, performance limits
and ambient conditions listed in the online catalog and
product documentation.
W
If unsuitable products are installed or used in safety-
relevant applications, this may result in unintended
system operating states that may lead to injuries
and/or equipment damage. Only use the product in
safety-relevant applications if such use is expressly
specified and permitted in the product documentation.
W
You may only commission the product if you have
determined that the end product (such as a machine or
system) in which the AVENTICS products are installed
meets the country-specific provisions, safety
regulations, and standards for the specific application.
W
Do not modify or convert the product.
W
Wear appropriate protective clothing, safety goggles
and, if necessary, a helmet during assembly. Observe
the applicable occupational safety regulations for the
system.
Safety instructions related to the product
and technology
Dangerous movements
Danger of death, injuries or damage to property!
O Make sure the relevant system component is not
under pressure or voltage before assembling or
when connecting and disconnecting plugs. Protect
the system against being restarted.
O Ensure personnel safety before switching on the
device.
Improperly laid cables
Danger of injury!
O Lay the cables so that no one can trip over them.
WARNING
CAUTION
General Instructions on Equipment and
Product Damage
Malfunction caused by closed housing ventilation port
If the housing ventilation port is closed, there is no
atmospheric equalization and the characteristics curve
will change.
O Ensure that the air can circulate freely through the
housing ventilation
port
1
(6).
O Never operate the device in an atmosphere
containing oil.
Danger due to electrostatic discharge (ESD)
Device defect or destruction!
O Do not touch the pins of the XPC 1 plug
Danger due to mechanical loads
Damage to the device!
O Do not place any mechanical loads on the device
under any circumstances.
Danger due to reverse polarity
Device defect or destruction!
O Only use tested cables.
Loss of the protection class IP54 if the device is
opened
Fluids and foreign bodies may damage the device.
O Never open the device.
3

Delivery Contents

The delivery contents include:
W
1 Pressure regulator ED05 Rail
W
1 set of operating instructions
1
NOTICE
1
15
(7).

Publicité

Table des Matières
loading

Table des Matières