Nameplate; Safety Instructions - Abicor Binzel MB GRIP 15 AK Mode D'emploi

3 Safety instructions

Standard length
Power/air cable connection
Execution
Tab. 6 Cable assembly
2.4 Abbreviations
DC
Duty cycle
MAC
Voltage rating
PSB
AUT-PSB
...KZS
...KKS
...HFS
Tab. 7 Abbreviations

2.5 Nameplate

3 Safety instructions
3.1 Classification
EN - 6
6 m (other lengths available on request)
G1/4
Direct connector or central connector
Direct current
Duty cycle
Maximum allowable concentration of harmful substances at the workplace
Classification of the insulation resistance, voltage strength and protection type
designates the series of manual torches
Automatic torches
Contact ignition
Short-circuit ignition
Non-contact ignition
The PSB manual torches are marked with a label on the torch handle and the
AUT PSB automatic torches with a label on the handle tube. When making
any inquiries, please remember the following information:
• Identification marking on torch handle, for example PSB 121 for manual
torch
Please observe the attached safety instructions.
The warning signs used in the operating instructions are divided into four
different levels and are shown prior to specific work steps. Arranged in
descending order of importance, they have the following meaning:
DANGER
Describes imminent threatening danger. If not avoided, it may cause severe
injuries or death.
PSB