Korg EC150 Mode D'emploi page 43

If you like, turn the stand over, with the outer part of the right leg panel resting on
7
the floor, and fix the power supply (F) with the clamp located under the pedal beam,
as shown in the diagram.
With two persons, lift the piano (E) in such a way as to be able to get to its bottom
8
part. Screw the short bolts (c) a few millimetres into the two holes near the back of
the piano. Leave most of the bolts free (not fully tightened).
c
Assembling the stand
E
c
F
41