Dometic RMD8 1 Série Notice D'utilisation page 37

RMD8xxx
➤ Only with high-performance unit:
Loosen the screw on the gas burner cover (fig. l, page 13, A).
➤ Press the catch below the burner cover inwards, and pull off the burner cover
(fig. l, page 13, A or B).
➤ Clean the burner pipe of coarse impurities using a suitable cleaning brush with
soft bristles (fig. m, page 14, A or B).
➤ Blow out the burner pipe with compressed air through the slots in the burner
pipe (fig. n, page 14, A or B).
➤ Attach the burner cover.
✓ The burner cover is fixed in place when it audibly clicks into place.
➤ Only with high-performance unit:
Screw the burner cover in place (fig. l, page 13, A).
➤ Only with high-performance unit:
Insert the condensation container.
➤ Attach the ventilation grille.
EN
Maintenance
37