Dymo LabelWriter SE450 Guide De Démarrage Rapide page 9

Do one of the following:
3
• For Windows: Click Install and follow the instructions in the installer.
• For Mac OS: Double-click the Installer icon and follow the instructions.
When prompted, connect the printer to your computer. See "Connecting the Printer".
4
If the printer is not in the printer list when the installation is complete, refer to the
Mac OS
ReadMe file for instructions on how to add the printer.
Connecting the Printer
Plug the USB cable into the USB port on the bottom
1
of the printer.
Connect the other end of the USB cable into an
2
available USB port on your computer or other
device, as appropriate.
Plug the power cord into the power adapter. See
3
Figure 4.
Plug the power adapter into the power connector on
4
the bottom of the printer.
Insert the power and USB cables through the cable channel.
5
When all the cables are connected, plug the power cord into an electrical outlet.
6
Follow the instructions in "Loading Labels" on page 6 for the correct way to load labels onto the
spool and insert into the printer.
USB
USB 10101 24VDC
Figure 4
24VDC
5