User Manual - SBS Eco Friendly Wireless TWS Mode D'emploi

UK
INSTRUCTION MANUAL
Base charger:
Get a USB / micro-USB cable: insert the micro-USB side into
the corresponding socket of the charging base (y) and the
USB side into a PC port or a travel charger. The LED light (x)
will flash red during charging and become solid red when the
base fully recharged.
Earphones charger:
Insert both earphones into the charging box: the LED lights (z)
will turn on solid red to indicate charging is in progress. The
LED lights will turn off when charging is complete.
Activation and pairing.
Make sure you turn off Bluetooth® on your smartphone. Press
and hold the MFB - multi-function button - for both earphones
for a few seconds, until both LED lights (x) flash red and blue
alternately. Wait a few seconds until the earphones recognize
each other and pair with each other. Only at this point
activate Bluetooth® on the smartphone: as soon as the pair
of earphones is found, select (OCEANO TWS) from the list: the
LED lights will turn off to confirm the pairing and emit a brief
blue flash about every 5 seconds. If only one earphone has
been paired by mistake, unpair it and repeat the procedure
from scratch. The earphones will subsequently activate
themselves, even by taking them off the charging base.
Turning off:
Press and hold down the button on the headset until the LED
light (x) turns off or place the earphones in the charging base.
Summary of functions:
Answering a call: quickly press MFB once
Ending a call: quickly press MFB once
Rejecting a call: press MFB for about two seconds
Voice assistant: press MFB for about 2 seconds
Play / pause music: press MFB quickly during playback
Recall last number: quickly press the MLF key twice
4