Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Parts needed:
(Not supplied with washer/dryer)
Inlet hoses with
flat washers
Check local codes, electrical supply and venting, and read
"Electrical Requirements" and "Venting Requirements" before
purchasing parts. Mobile home installations require metal
exhaust system hardware available for purchase from the
dealer from whom you purchased your washer/dryer. For
further information, please reference the "Assistance or
Service" section of the Washer/Dryer Use and Care Guide.
Optional equipment:
(Not supplied with washer/dryer)
Refer to your Use and Care Guide for information about
accessories available for your washer/dryer.
4
■
Vent clamps
■
Vent elbows and ductwork
Alternate parts:
(Not supplied with washer/dryer)
Your installation may require additional parts. To order, please
refer to toll-free numbers on back page of your Use and Care
Guide.
If you have:
You will need:
Overhead sewer
Standard 20 gal. (76 L) 39" (990 mm)
tall Drain Tub or Utility Sink, Sump
Pump and Connectors (available from
local plumbing suppliers)
Floor drain
Siphon Break Part Number 285320,
Additional Drain Hose Part Number
285702, and Connector Kit Part
Number 285442
1" (25 mm) standpipe
2" (51 mm) diameter to 1" (25 mm)
diameter Standpipe Adapter
Part Number 3363920,
Connector Kit Part Number 285835
Laundry tub or
Sump pump system (if not already
standpipe taller than
available)
96" (2.4 m)
Drain hose too short
Extension Drain Hose
Part Number 285863,
Connector Kit Part Number 285835
Lint clogged drain
Drain Protector Part Number 367031,
Connector Kit Part Number 285835
Water faucets
2 longer water fill hoses:
beyond reach
6 ft (1.8 m) Part Number 76314,
of fill hoses
10 ft (3.0 m) Part Number 350008
Publicité
Table des Matières
