Dantherm CDF 35T Série Manuel D'entretien page 20

Mounting and installation,
Condensate outlet The condensate outlet is located at the base of the dehumidifier. The unit has a drain
Placing of the
condensate
Connection of
power supply
20
spigot intended for connection of a ½'' flexible or fixed water hose.
It is important that the hose from the dehumidifier to the drainage has a fall of at least
2 % to make sure that the water runs away from the condensate tray.
As an alternative a condensate pump can be fitted at the water outlet to pump the
water to a drain.
The placing of the
condensate outlet
is shown on the
drawing below –
the unit is seen
from above.
Power is connected to the unit in accordance with the nameplate. Please refer to the
wiring diagrams on the pages 59.
Note! All electrical connections must be made in accordance with local power supply
company regulations.
continued