Factory Default; Language - Abus EYTRON TV8901 Instructions D'installation

BAUDRATE
Use the +/– keys to adjust the baud rate. The following values are possible: 1200 BPS, 2400 BPS, 4800
BPS, 9600 BPS, 19200 BPS
For more details on the required baud rate, refer to the description of your PTZ camera.
CMD DELAY
Use the + and – keys to adjust the command delay time.
SPEED SETUP
Here you can adjust the pan, tilt, zoom and focussing speed. Use the direction keys
cursor position, and press +/– to change the value of the selected menu item.

FACTORY DEFAULT

FABRIKEINSTELLUNG
ALL
SCREEN DISPLAY
CAMERA COLOR SETUP
MOTION SETUP
PANTILT SETUP
SCHEDULE SETUP
CONFIGURATION
RUN
SELECT MENU: ▲▼, & [ENTER]
Here you can restore all factory settings simultaneously or individually.
Move the cursor using the direction keys
Press Enter (3) to activate/deactivate the factory settings (ON/OFF).
Select "START" and confirm by pressing Enter (3): the selected factory settings are now restored.
To exit a menu item, press the menu key (15).

LANGUAGE

Press the + or – keys to select a language (ENGLISH / FRENCH / DUTCH / GERMAN).
The on-screen menu is now changed to the selected language.
OFF
OFF
OFF
OFF
OFF
OFF
OFF
.
▲▼
28
to change the
▲▼