Monitor Setup; Configuration; Camera Setup; Hdd Management - Abus EYTRON TV8901 Instructions D'installation

MONITOR SETUP

VGA SETUP:
Confirm this menu item with Enter (3) to open a submenu.
In this submenu, you can change the VGA resolution.
Possible resolutions are:
Use the +/– buttons to change the value.
IMPORTANT: This submenu is available it a VGA board (accessory) is fitted
in the device.
COLOR BAR TEST:
You can change the colour settings in this submenu.

CONFIGURATION

CONFIGURATION

HDD MANAGEMENT

TIME / DATE SETUP

CAMERA SETUP

INTERVAL SETUP
ALARM SETUP
BUZZER SETUP
PASSWORD SETUP
SYSTEM INFORMATIONEN
SELECT MENU: ▲▼, & [ENTER]
HDD MANAGEMENT
HDD SETUP:
Confirm this menu item with Enter (3) to open another submenu.
Here you can view the hard disk status and clear the hard disk.
To clear the hard disk, select "HDD CLEAR" and confirm with Enter (3), then enter your "Admin" password.
The hard disk is automatically cleared.
To exit this menu item, press the menu key again (15).

HDD INFORMATION:

Confirm this menu item with Enter (3) to open another submenu.
This shows information about hard disks used in the system.
To exit this menu item, press the menu key again (15).

TIME/DATE SETUP

Confirm this menu item with Enter (3) to open another submenu.
Using the direction keys
Use the –/+ keys to change the specification accordingly.
With the direction keys, select line 4 and change the time (hour/minute/second).
To exit this menu item, press the menu key again (15).
640 x 480 / 75HZ
800 x 600 /60HZ
1024 x 768 / 60HZ
Press the direction keys
To confirm your selection, press Enter (3).
To exit a menu item, press the menu key (15).
(2 and 5), you can switch between: year, month, day.
▲▼
(2 and 5) to select a menu item.
▲▼
17