Description Of Control Keys And Leds - Abus EYTRON TV8901 Instructions D'installation

Description of control keys and LEDs

(1) In recording/standby mode: No function
In playback mode:
In programming mode: Press to move the cursor to the left.
(2) In recording/standby mode: No function
In playback mode:
In programming mode: Press to move the cursor up.
(3) Enter key
In recording/standby mode: No function
In playback mode:
In search mode:
In programming mode: Press to confirm your selection.
(4) In recording/standby mode: No function
In playback mode:
In programming mode: Press to move the cursor to the right.
(5) In recording/standby mode: No function
In playback mode:
In programming mode: Press to move the cursor down
(6) REC: The LED lights up red during recording.
(7) FULL: The LED lights up red if the hard disk is full.
(8) RUN: The LED lights up red when the rotating wheel is used.
(9) PLAY: The LED lights up green during playback.
(10) NET: The LED lights up yellow if a LAN connection is active.
(10) ACTIVE: The LED lights up yellow if an option is activated
(PTZ control, search function, rotating wheel, ...).
Press to switch playback from forwards to
reverse.
Press to increase playback speed.
No function
Start playback.
Press to switch playback from reverse to
forwards.
Press to increase playback speed.
9
(1) (2) (4) (5)(6)(7)
(3) (5) (9,10,11)