External Device; Tcp/Ip Setup; Connection Setup - Abus EYTRON TV8901 Instructions D'installation

EXTERNAL DEVICE

EXTERNAL DEVICE
TCP / IP SETUP
RS232C SETUP
PANTILT SETUP
SELECT MENU : ▲▼, & [ENTER]

TCP/IP SETUP

TCP / IP SETUP
IP CONFIG SETUP
DDNS SETUP

CONNECTION SETUP

DHCP SETUP
SELECT MENU : ▲▼, & [ENTER]
IP SETUP
IP SETUP
MAC ADRESS 00-0A-A2-05-01-B7
IP ADDRESS 192.168.001.105
IP PORT
GATEWAY 000.000.000.000
SUBNET MASK 255.255.255.000
DHCP SETUP
SELECT MENU : ▲▼, & [ENTER]
Here you can make settings for the TCP/IP protocol.
You can define this data automatically (DHCP AUTOMATIC) or manually (DHCP MANUAL), depending on
the network connection.
To define data manually, use the + or – keys to enter the IP address, the SUBNET MASK,
the IP PORT and the GATEWAY.
DHCP SETUP:
Here you can make the TCP/IP setting automatically or manually.
Press Enter (3) to change the DHCP mode.
CONNECTION SETUP:
Under TIMEOUT, you can set the maximum time required for connecting to the PC.
Define the number of connection attempts under RETRY COUNT.
Use the direction keys ▲▼ to change the cursor position and the + and – keys to change the values of the
selected item.
Move the cursor using the direction keys
Confirm your selection with Enter
submenu.
To exit this menu item, press the menu key (15).
Move the cursor using the direction keys
Confirm your selection with Enter
submenu.
MANUEL
Move the cursor using the direction keys
Confirm your selection with Enter
Use the – and + keys to change the values of the selected
menu item.
08000
To exit a menu item, press the menu key (15).
MANUEL
26
.
▲▼
(3) to open another
.
▲▼
(3) to open another
.
▲▼
(3).