Interval Setup; Alarm Setup; Alarm Input - Abus EYTRON TV8901 Instructions D'installation

INTERVAL SETUP

INTERVAL SETUP
SWITCHING INTERVAL
FULL SCREEN
PIP SCREEN
EVENT RECORD
EVENT UPDATE TIME
SELECT:▲▼, CHANGE VALUE: +-
FULL SCREEN
The length of time a fullscreen sequence is to last.
Possible values: 1, 2, 3,...........99 sec.
PIP SCREEN (picture-in-picture)
The length of time a picture-in-picture sequence is to last.
Possible values: 1, 2, 3,...........99 sec.
EVENT UPDATE TIME
The minimum time for separating two events.
If two or more events occur in this time, they are saved as a single event in the event list.
Possible values: 10, 20, 30,..........990 sec.

ALARM SETUP

ALARM SETUP
CHANNEL

ALARM INPUT

DURATION
N.O ...... NORMAL OPEN
N.C ....... NORMAL CLOSE
---- ....... DISABLE
SELECT:▲▼, CHANGE VALUE: +-
CHANNEL
Use the +/– buttons to select the camera for which you want to change the setup.
ALARM INPUT
Here you can select the alarm input:
N.C.: The alarm input is normally closed and has to be opened in the event of an alarm.
N.O.: The alarm input is normally open and has to be closed in the event of an alarm.
------: The alarm input is locked.
DURATION
The length of time an alarm recording is to last. (0 sec.....300 sec).
Confirm your selection with Enter
submenu.
Press the direction keys
01SEK
04SEK
position.
Use the – and + keys or the rotation wheel to change the values
of the selected menu item.
600SEK
To exit this menu item, press the menu key again (15).
Confirm your selection with Enter
Press the direction keys
CH01
position.
N.C
Use the – and + keys to change the values of the selected menu
100
item.
To exit this menu item, press the menu key again (15).
(2 and 5) to change the cursor
▲▼
(2 and 5) to change the cursor
▲▼
20
(3) to open another
(3) to open another submenu.