Abus EYTRON TV8901 Instructions D'installation page 41

Preface
Dear Customer,
Thank you for purchasing this 4-channel digital recorder. You made the right decision in choosing this state-
of-the-art technology,
which complies with the current standards of domestic and European regulations. The CE has been proven
and all related certifications are available from the manufacturer upon request.
To maintain this status and to guarantee safe operation, it is your obligation to observe these operating
instructions! In the event of questions, please contact your local specialist dealer.
This 4-channel digital recorder is used in combination with connected video signal sources (B/W and colour
cameras) and video output devices (monitors) for object surveillance. It can simultaneously record signals
from up to 4 connected video sources. Data storage is subject to local national data-protection guidelines.
During installation, draw your customers' attention to the existence of these guidelines. With the help of the
built-in CD/DVD drive, you can save image data, transfer it to a PC, and open it there using special
software. You can also view and archive complete video sequences on your PC.
Precautions
The 4-channel digital recorder and connected components must be kept free of moisture (cellars and similar
surroundings are to be strictly avoided). Use of this product for other than the described purpose may lead to
damage of the product. Other hazards such as short-circuiting, fire, electric shock, etc., are also possible.
The recorder is designed for operation with a transformer for mains electricity at 230 Volt AC / 50 Hz.
No part of the product may be changed or modified in any way. Connection to the public power network is
subject to country-specific regulations. Please be aware of applicable regulations in advance.
To avoid fire and injury,
please observe the
following:
• Securely fasten the device at a
dry location in the building.
• Make sure there is
sufficient ventilation.
• Do not expose the device to
temperatures less than -10°C
or more than 50°C.
• The device is designed for
indoor use only.
• The maximum humidity
must not exceed 90%
(non-condensing).
• Ensure that the voltage is
disconnected when performing
work on the device.
Please observe the following
regulations to ensure
trouble-free operation of
your device.
The 4-channel digital recorder
•
is supplied by a 12V DC
transformer.
The device should be
connected via a separate
fused line to the local 230V
AC network.
• Connecting the device to
the local mains network is
subject to country-specific
regulations.
2
General:
Improper or careless installation
work may lead to faults and poor
image quality. Therefore please
read the instructions very carefully
and follow the installation
instructions for lines and
components precisely.
The manufacturer reserves
the right to make technical
modifications at any time.