Technical Specifications - easydriver c-Go Instructions D'assemblage Et Mode D'emploi

9. Technical specifications

c-Go specifications
Battery type
Battery capacity
Input voltage
Input frequency
Output current
Output voltage Mains supply
Output voltage charger (GEL/AGM)
Output voltage charger (e. g. Optima)
Max. output power
Efficiency
Protection class
Operating temperature*
Storage temperature
Protection
Cooling
Max. humidity
Dimensions
Weight
Guidelines
Certification mark
*Operating temperature: higher temperatures will automatically reduce the output current.
**Polarity reversal: the protection against polarity reversal will not work when the c-Go is connected as a supply unit.
18
10 A
12 V Lead Acid GEL/AGM/Optima
55 – 100 Ah
220 – 240Vac nominal, (single phase)
50 – 60 Hz
max. 10 A
13.2V
max. 14,4 V
max. 14,7 V
150 W
>90 % at full load and 230V
0 – +40 °C
–15 – +50 °C
Excess voltage, Excess temperature, Short-circuit,
Polarity reversal**
Convection
95 % (non condensing)
210 x 175 x 60 mm
appr. 1.2 kg
EN60335-1, EN60335-2-29 (battery chargers),
EN55014-1 Class B, EN55014-2 Class B, RoHS
Eurofins GS
20 A
75 – 200 Ah
max. 20 A
240 W
II
Fan