System Commands; Events - Balluff BCS Q40BBAA-PSICFHC-Serie Notice D'utilisation

BCS Q40BBAA-PSICFHC-...
Capacitive Proximity Switches
6
IO-Link Functions (continued)
6.4

System commands

Value (dec) Name
0x01 (1) ParamUploadStart
0x02 (2) ParamUploadEnd
0x03 (3) ParamDownloadStart
0x04 (4) ParamDownloadEnd
0x05 (5) ParamDownloadStore
0x06 (6) ParamBreak
0x4D (77) Teach Full
0x4E (78) Teach Empty
0x4F (79) Teach Cancel
0x80 (128) Device Reset
0x81 (130) Factory Reset
6.5

Events

Event Code (dec) Name
0x4210 (16912) Device temperature over-run
0x5000 (20480) Device hardware fault
0x5011 (20497) Non volatile memory loss
0x5111 (20753) Primary supply voltage under-run
0xFF91 (65425) Data Storage Upload Request:
Device parameters were changed.
Request to master to read the
parameters.
www.balluff.com
Description
Start block configuration for reading
End block configuration for reading
Start block configuration for writing
End block configuration for writing
End block configuration for writing and Set Data Storage
Upload Request Flag
Abort block parameterization
Full calibration
Empty calibration
Cancel teach-in
Restart device
Reset factory defaults
Type / Mode Device Status
Warning / coming, 2 – Out of Specification
going
Error / coming, going 4 – Failure
Error / coming, going 4 – Failure
Warning / coming, 2 – Out of Specification
going
Message / one-time
english 13