Operating Tips; Setting The Temperature; Alarm Function - Siemens KG D Série Mode D'emploi

en

Operating tips

When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
Do not put any food in the appliance
beforehand.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Refrigerator compartment
Turn temperature controller, Fig. !/10,
to the required setting.
We recommend a medium setting.
Changing the setting clockwise will lower
temperatures in the refrigerator
compartment.
Select a very cold setting only
temporarily if:
the ambient temperature is high,
■
door is opened frequently,
■
large quantities of food are placed in
■
the refrigerator compartment.
28
Freezer compartment
The temperature can be set from -16 °C
to -26 °C.
Keep pressing temperature setting
button 4 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on display 2.
We recommend a factory setting of -
18 °C in the freezer compartment.

Alarm function

In the following cases an alarm may be
actuated.
Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than one minute. Close
the door to switch off the warning signal.
Temperature alarm
The temperature alarm (beeping signal)
switches on if the freezer compartment is
too warm and the frozen food is at risk
of thawing.
Temperature display flashes, Fig. "/2.
Note
Do not refreeze thawing or thawed food.
Only ready meals (boiled or fried) may
be refrozen.
No longer store the frozen produce for
the max. storage period.