Switching The Appliance On; Operating Tips - Siemens KI24F Série Mode D'emploi

Controls
Fig. 2
1
On/Off button
Serves to switch the whole
appliance on and off.
2
"super" button
Serves to switch the "super"
freezing function on and off (see
chapter entitled "Super freezing").
3
Temperature selection button
The required temperature is set
with this button.
4
Display super freezing
Illuminates when super freezing is
on.
5
cold, fresh and freezer display
The displays are lit when the
appliance is in operation.
6
Temperature display refrigerator
compartment
Indicates the set temperature
■
of the refrigerator
compartment.
Indicates "SU" when super
■
freezing is switched on.
Switching
the appliance on
Fig. 2
Switch on the appliance with the On/Off
button 1.
The temperature display 6 indicates
the selected temperature. Displays 5
"cold+fresh" and "freezer" come on.
The appliance starts to cool, the light is
switched on when the door is open.
We recommend a setting of +4 °C.
Perishable food should not be stored
above +4 °C.

Operating tips

After the appliance has been switched
■
on, it may take several hours until the
set temperatures have been reached.
Do not put any food in the appliance
beforehand.
The temperature in the freezer
■
compartment depends
on the temperature in the refrigerator
compartment. Warmer refrigerator
compartment temperatures also cause
warmer freezer compartment
temperatures.
While the refrigeration unit is running,
■
water droplets or a thin layer of ice
may form at the rear panel of the
refrigerator. This is nothing unusual.
It is not necessary to scrape off
the frost or wipe off the water droplets.
The rear panel defrosts automatically.
The condensation flows into
the evaporation area of the appliance
via the condensation channels and
the drainage hole.
The partition in the lower "cool-fresh"
■
container is required for functional
reasons and should not be removed.
The temperature behind the partition is
lower than in the front area of the
container.
en
29