Light (Led); Tips For Saving Energy - Siemens KG D Série Mode D'emploi

en
Interior fittings
All variable parts of the appliance
can be taken out for cleaning.
Take out glass shelves
Fig. (
To do this, pull out shelf, lift at the front
and take out.
Removing the container
Fig. $
Pull out the container all the way, lift at
the front and remove.
Taking out the water container
Fig. ,
1. Take out the water container.
2. Remove cover from the water
container and empty water container.
3. Clean individual parts of the water
container with clear water and wipe
dry with a cloth.
Note
To prevent water from running out,
ensure that the water container is
inserted with the water outlet positioned
exactly on the water supply of the door.

Light (LED)

Your appliance features a maintenance-
free LED light.
These lights may be repaired
by customer service or authorised
technicians only.
36

Tips for saving energy

Install the appliance in a dry, well
■
ventilated room! The appliance should
not be installed in direct sunlight
or near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
Allow warm food and drinks to cool
■
down before placing in the appliance.
Thaw frozen food in the refrigerator
■
compartment and use the low
temperature of the frozen food to cool
refrigerated food.
Open the appliance as briefly as
■
possible.
Occasionally clean the rear
■
of the appliance to prevent an
increased power consumption.
If available:
■
Fit wall spacers to obtain the indicated
energy rating of the appliance (see
Installation instructions). A reduced
wall gap will not restrict the function
of the appliance. The energy rating
may then increase slightly.
The arrangement of the fittings does
■
not affect the energy rating of the
appliance.