Cleaning Instructions - Schiltknecht Messtechnik ThermoAir3 Mode D'emploi

Cleaning instructions:

Indication unit:
Cable, extension rod,
case:
Schiltknecht Messtechnik AG
Instrument and probe must be switched off or
disconnected prior to cleaning.
Dirt deposits on the indication unit can be removed
with the following agents:
- Soapy water
- EDP plastic cleaner
- Window cleaning fluid (without ammonia)
- and for any stubborn deposits,
pure benzene
These solutions are only to be applied to the
instrument with a fluff-free cloth.
Only carry out surface cleaning! The instrument
is never to be immersed in the solution!.
The following agents:
- Soapy water
- EDP plastic cleaner
- Window cleaning fluid (without ammonia)
- and for any stubborn deposits,
pure benzene
These solutions are only to be applied to the parts
with a fluff-free cloth.
Only carry out surface cleaning! The parts are
never to be immersed in the solution!
ThermoAir3
43