Mounting The Product; Using The Product - Dometic FP210 Instructions De Montage Et De Service

Mounting the product

• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
4 Mounting the product
I
NOTE
To mark the holes for the blind, you can use the template that is included
in the package.
1. Observe the following mounting options:
– Mounting without a sensor box (fig. 3, page 4)
– Mounting with a rain sensor box (fig. 4, page 4)
– Mounting with a camera sensor box 1 (fig. 5, page 4)
– Mounting with a camera sensor box 2 (fig. 6, page 5)
2. Mount the blind as shown in the figures: fig. 7, page 5 to fig. 0, page 6.
3. fig. a, page 7: The tension of the cord (2) can be adjusted by shifting of the
brass eye (1).
5

Using the product

Closing the blind (fig. b, page 7)
➤ Pull the blind with both hands up to the desired position.
The two cords in the guide rails keep the blind in the desired position.
Opening the blind
➤ Guide the blind back into its holder slowly using both hands.
10
FP210
EN