Product Description And Specifications - Bosch GSR 12V-35 Professional Notice Originale

12 | English
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Keyless chuck
(2) Torque presetting ring
(3) Gear selector
A)
(4) Battery unlocking button
A)
(5) Battery pack
(6) Rotational direction switch
(7) On/Off switch
(8) Battery charge-control indicator
(9) "PowerLight"
(10) Handle (insulated gripping surface)
A)
(11) Screwdriver bit
A)
(12) Universal bit holder
A)
(13) Belt clip
A)
(14) Bit holder
A)
(15) Colour clip
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
1 609 92A 4KY | (11.03.2019)
Technical Data
Cordless drill/driver
Article number
Rated voltage
No-load speed
– First gear
– Second gear
Max. torque, hard/soft
screwdriving application ac-
cording to ISO 5393
Max. drilling diameter (first/second gear)
– Steel
– Wood
Max. screw diameter
Chuck capacity
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
B)
– during operation and
during storage
Recommended batteries
Recommended chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Noise/vibration information
Noise emission values determined according to
EN 60745-2-1, EN 60745-2-2.
Typically the A-weighted noise level of the power tool is 73
dB(A). Uncertainty K = 3 dB. The noise level when working
can exceed 80 dB(A).
Wear hearing protection!
Total vibration values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-1, EN 60745-2-2:
2
Drilling into metal: a <2.5 m/s , K=1.5 m/s
h
2
Screwdriving: a <2.5 m/s , K=1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
GSR 12V-35
3 601 JH8 0..
V= 12
-1 A)
min 0 - 460
-1 A)
min 0 - 1750
A)
Nm 35/20
mm 10
mm 32
mm 8
mm 0.8–10
A)
kg 0.93–1.2
°C 0 to +45
°C -20 to +50
GBA 12V...
AL 11.. CV
GAL 1110 CV
GAL 12.. CV
GAL 12V-..
GAX 18V-30
2
,
2
.
Bosch Power Tools