HBM PW27 Série Notice De Montage page 6

6
Platform Scales PW27...
Ambient conditions
With stainless steel single point load cells, please note that acids and all
materials which release ions will also attack all grades of stainless steel and
their welded seams.
Should there be any corrosion, this could cause the load cell to fail. If this is
the case, the operator must take appropriate protective measures.
Unauthorized conversions and modifications are prohibited
Load cells must not be modified from the design or safety engineering point of
view except with our express agreement. Any modification shall exclude all
liability on our part for any damage resulting therefrom.
Qualified personnel
Load cells must only be installed by qualified personnel, strictly in accordance with
the specifications in conjunction with the safety requirements and regulations listed
below. It is also essential to observe the appropriate legal and safety regulations
for the application concerned. The same applies to the use of accessories.
Qualified personnel means persons entrusted with siting, mounting, starting
up and operating the product, who possess the appropriate qualifications for
their function.
Accident prevention
The prevailing accident prevention regulations must be taken into account,
even though the breaking load is well in excess of the full scale value. Pay
particular attention to the following data from the specifications
− limit load (E )
L
− limit load at max. eccentricity
− limit lateral loading (E )
Lq
− breaking load.
HBM A3010−1.0 en/de/fr