Avantgarde LBWC-42SBS Manuel D'utilisation page 17

• Once you have adjusted the left or right zone to the desired temperature, release the
temperature pad. At this time the temperature displayed will flash for approximately 3 seconds
to confirm the selected temperature. Once the display stops flashing the temperature display
will indicate the current temperature of that zone.
Note:
The temperature display can be changed between Celsius and Fahrenheit by simultaneously
pressing and holding both pads
This unit cannot be in
Interior Light
To turn on / off the interior light, press the
perform this operation.
(warmer) and
(Lock) mode to perform this operation.
(
Light) pad. The unit cannot be in the
(colder) for approximately 3 seconds.
(Lock) mode to
17