Testing The Spray Deterrent; Choosing A Location - Petsafe ssscat PDT17-14118 Manuel D'utilisation

STEP 3

Testing the Spray Deterrent

Ensure the batteries have been installed and the Motion
Detector Unit is set to the ON ( | ) position. Move your
hand in front of the Motion Sensor. The unit will detect your
presence and activate accordingly.
STEP 4

Choosing a Location

1. Place the Spray Deterrent in a location you want your
pet to avoid such as in a doorway, on kitchen worktops,
window sills or around your rubbish bin.
2. Slide the Spray Direction Switch up or down to the
desired position.
3. Adjust the Motion Sensor by twisting left or right into one
of the fi ve positions.
Note: The spray emits approximately 100 centimeters from
the unit. It is recommended that the unit be positioned at a
level that would be at or below your pet's head.
8
Do not puncture or incinerate the
refi ll canister. Do not expose to
extreme heat.
www.petsafe.net
100 centimeters