Product Operation - Tineco Pure One S12 Série Mode D'emploi

Product Operation

Start to Work
Note:
• Before the first use, please charge the appliance (see "Charging the battery") for
3-4 hours in an area where the temperature is higher than 39.2°F (4 ) but lower than 104°F
(40 ), and the above charging time based on the condition that the battery is cooled.
• Select the accessories according to needs (see "Accessory Instructions").
Press the switch button, the appliance
will start to work.
Power up
The appliance is activated in AUTO mode
by default, swipe the power control slider
to switch to Manual mode. Press the AUTO
button for 2s to switch back.
Digital display screen
AUTO mode
Power control slider
Pull the switch lock for continuous power
mode.
11