Electrical And Pneumatic Safety Instructions; Proper Use; Manufacturer's Specifications; Scope Of Delivery - Asco joucomatic POSIMATIC 606 Série Manuel D'installation

POSIMATIC

1.3 Electrical and pneumatic safety instructions

!
The assembly, electrical and pneumatic connection as well as startup of the ASCO/JOUCOMATIC
positioner must be carried out by trained, qualified personnel only.
Warning
The electrical safety of all power supplying equipment must be ensured.
Please provide for the following equipment:
- 24 VDC power supply unit.
- 1 analog output of 0/4-20mA for current setpoint (terminal Iw+, Iw-),
- or 1 analog output of 0-10V (terminal Uw+, Uw-).
All electrical specifications must be observed.
All safety measures for the installation and startup of pneumatic actuators must be adhered to.
The high forces generated by the positioning actuators may cause injury.

1.4 Proper use

The POSIMATIC is a smart electropneumatic positioner to be mounted to pneumatically operated linear or rotary actuators.
The positioner can be mounted directly on the actuator with a corresponding assembly kit containing the mounting bracket
or adapter, the position sensor and the appropriate fastening screws.
The positioner can also be assembled externally. No mounting bracket or adapter is required for this purpose.
1.5 Tools required for assembly and connection
- Open-end wrench – dimensions across flats: 8, 10, 27
- Allen keys: 3 mm and 4 mm
- Screw driver: 3.5 mm
2.

Manufacturer's specifications

2.1 Scope of delivery

Please check the delivery immediately on receipt for completeness and intactness. The scope of delivery is detailed in the
shipping documents.
Check the products delivered and the ordering codes to see whether the construction and quantity comply with your order.
If you have ordered a complete unit consisting of positioner and valve, these devices and the pertinent accessories are
fully preassembled and factory-set at delivery. ASCO/JOUCOMATIC's positioner is ready for immediate use.
4
INSTALLATION